FAQ
Hardscaping in Pacoima, answered
The questions we hear most from Pacoima homeowners.
Two different trades, and the distinction is worth understanding before you spend money. Hardscaping as we build it is dry laid. Pavers, flagstone, gravel, and decomposed granite rest on compacted aggregate and a thin bedding layer, held by edge restraint and locked together with joint sand. Concrete and masonry go into forms with reinforcing steel, or get laid up in mortar. The practical difference shows over time. A dry laid surface moves slightly with the ground instead of cracking, and any single unit can be lifted and reset, so a repair does not have to mean demolition.
Not necessarily, though most of it usually should. We walk the property first and separate what is sound from what has failed. Flatwork that has broken into pieces, dropped at one end, or lifted at a joint is telling you the ground beneath it was never properly compacted, and paving over that simply pushes the problem forward a few years. Original walkways and slabs from the postwar decades were frequently placed straight onto native soil with no base at all. Where a section is still flat and stable, we leave it alone and build around it.
Everything that decides whether the patio is still level a decade from now. We excavate to depth, compact the subgrade, then bring in crushed aggregate placed in lifts of a few inches, running the plate compactor across each lift before the next one goes down. Base depth follows the load, so a garden path needs less than an area a vehicle crosses. Bedding sand is screeded flat over the finished base, units are set into it, and the whole field is compacted once more after joint sand has been swept into the joints.
It has to be pitched, because flat ground offers water no natural exit. We set roughly a quarter inch of fall per foot running away from the house toward a planting bed, a drain inlet, or the side yard. Where a patio is boxed in by fences on every side, a channel drain along one edge or catch basins at the low corners carry water into solid pipe and out to the curb. Building that fall in at base stage costs very little. Fixing standing water after the surface is finished costs a great deal.
Warm enough to matter if the color is chosen carelessly. Long dry summers with direct exposure push surface temperature up on any paving, and dark charcoal or deep red units absorb noticeably more heat than lighter tan and gray tones. For a yard where children and dogs go barefoot, we steer toward lighter colors and place the seating area where afternoon shade lands, whether that comes from the house, an existing tree, or a cover added later. Gravel and decomposed granite run cooler than solid paving, which makes them useful for the paths between planted areas.
Quality concrete pavers carry pigment through the full thickness of the unit rather than only across the face, so color softens a little in the first year and then holds steady. What people usually notice is not fading but efflorescence, a light haze of mineral salts working its way out, which weathers off on its own. Natural stone changes very little. Decomposed granite lightens as the surface dries and dusts, and topping it up restores the tone. Sealer is optional and largely cosmetic, deepening color and helping with stains rather than protecting the paving structurally.
Start from the gathering rather than from a square footage number. Yards on these streets get genuinely used, so we ask how many people turn up at the biggest event of the year, whether there is one long table or several small ones, where the grill sits, and how people move between the kitchen door and the food. A patio has to hold chairs pulled back from the table with room to walk behind them. We paint the outline on the ground before any excavation so you can walk it while changes still cost nothing.
Concrete pavers, for most families. They are manufactured to a consistent thickness, sit tight against one another, and absorb daily use, furniture being dragged, and children running across them without complaint. Flagstone looks wonderful and suits informal paths, though irregular thickness makes a perfectly flat surface harder to achieve and a rocking stone becomes a trip point. Decomposed granite handles moderate traffic but scatters where people pivot and turn. Our usual approach puts pavers where the real activity happens and reserves looser materials for secondary routes that see lighter use.
Very much so, and it is one of the better values available. Decomposed granite gives you a firm walkable surface for a fraction of what paving costs per square foot, drains freely, and suits side yards, seating nooks, paths through planting, and areas you may want to build on properly later. It does want a stabilizer binder, a solid edge to contain it, and light topping up every few years. Keeping it away from door thresholds prevents tracking indoors. Used deliberately, it frees the budget to pave the areas that genuinely need paving.
Edge restraint is what stops the outer course from walking outward. Normally that is a heavy plastic or aluminum edging spiked down into the compacted base, and on heavier applications a concrete haunch buried below finished grade. Leave it out and the perimeter units spread under traffic, joints open, sand escapes, and the field loosens from the outside inward. Nearly every failed paver patio we are called out to inspect failed at the edge first and worked its way in. The material cost is minor, and there is no version of this job where skipping it makes sense.
Polymeric sand on most patios and walkways. It goes in full depth, gets misted to activate the binder, and hardens enough to resist washing out while discouraging weeds and ants. Plain washed sand still has its place, particularly on permeable installations designed to let water pass straight through the joints. Whichever we use, the joints have to be filled to the bottom and the field compacted with a plate over a protective pad, so the sand drops down into the joint instead of bridging across the top of it.
Yes, and that flexibility is one of the advantages of dry laid work. Segmental wall block stacks on a compacted footing of aggregate and locks together, so a seat wall goes up without forms, mortar, or cure time. Capped at seating height, it hands you extra places for people to sit once the chairs run out, which a busy yard puts to use constantly. The same units build a low planter at the patio edge. Borders can also be handled with a soldier course of pavers set on edge to frame the field cleanly.
Level changes turn up even on flat lots, usually at a back door threshold, at an existing slab, or where a new patio is built up to meet the house. Dry laid steps sit on compacted base with risers formed from wall block or thick stone treads, and every riser is held to the same height so nobody misjudges one after dark. If the patio has to come up more than a course or two, the perimeter gets a proper retaining element instead of loose stacked stone, and the fill behind it is compacted in lifts.
Pacoima sits inside the City of Los Angeles, so any permitting runs through Los Angeles Building and Safety. A ground level dry laid patio, walkway, or gravel area normally does not require one. Permits enter the picture when a retaining wall passes the height threshold and needs an engineered design, when a structure is built over the surface, or when the paved area is large enough relative to the lot that coverage and drainage rules apply. Anything crossing that line gets identified while we are pricing the work, not after the team shows up.
Phasing is normal on these properties and we plan around it. The important part is drawing the finished yard first, then choosing what gets built now. Grade and drainage across the whole area are worth establishing in the opening phase, since they are difficult to correct once surfaces are down. From there the patio can go in this year while walkways, a seat wall, or a gravel side yard follow later without disturbing finished work. Waste comes from adding a path later along a route nobody planned, which means cutting into paving already paid for.
Sweeping and an occasional rinse handles most of it. Joint sand wants topping up every few years in the busiest spots, and sealing is a choice rather than a requirement. The real advantage appears when something goes wrong. If a section settles or a tree root pushes up a corner, those units lift out, the base underneath is corrected, and the same pavers go back down leaving no visible patch. A poured slab in the same situation has to be broken out and replaced, and a new pour never matches the color of the old one.
One licensed contractor handles every phase of it. Daniels Landscaping stays accountable for the work. The same employees who break out the old flatwork, haul it off, cut the grade, and compact the base are the ones screeding bedding sand and setting units the next day. That continuity is the entire point, because base work disappears from view once the surface goes down, and a team that knows it has to stand behind the finished patio has every reason to compact it properly. You will see the same people at your property from the first day to the last.
Call the office at (818) 443-9300 and we will come out, measure, and look closely at what is already in the ground. The visit and the written estimate are free, with nothing owed and no obligation attached. We price the work item by item, so demolition and haul away, base preparation, materials, edge restraint, and labor each appear separately and you can see exactly where the money goes. Daniels Landscaping holds California license 1138709 and builds with one licensed contractor, from breaking out the old concrete to the last course of edging.