FAQ
Landscape Design in Valley Village, answered
The questions we hear most from Valley Village homeowners.
Design is the thinking that happens before construction. On a property here it covers where the outdoor rooms sit, how you move between them, which surfaces go where, what gets planted in each exposure, how grade and drainage will behave on flat ground, and where irrigation and lighting will run. You end up with a drawn plan showing layout, dimensions, materials, and planting, not a verbal idea you have to trust. The value is that changes happen on paper, where moving a patio six feet costs a pencil line rather than a week of labor and a pile of broken pavers.
We start with the trees, since they are the defining feature in this neighborhood and the one element a design cannot relocate. Canopy spread, trunk position, and the likely root zone all get recorded. Then grade, which is close to flat throughout the area, and where water stands after rain. Then shade patterns, soil condition, sight lines from the main windows, privacy from neighboring homes, and the existing irrigation and utilities. The walk usually turns up a constraint or two the homeowner had not considered, and those tend to shape the plan more than any preference does.
It sets the rules. Beneath a dense canopy most sun loving material simply will not perform, so the palette narrows to shade tolerant ground cover, ferns, and understory shrubs that are genuinely content in low light. Watering changes as well, because shaded soil dries far more slowly and gets overwatered out of habit. We map the shaded areas first, plant them appropriately, and save the sun loving material for the few open pockets. Fighting the canopy produces a yard that looks thin within two seasons. Planning for it produces one that fills in.
By looking at the yard at more than one moment. Shade under mature trees travels through the day and shifts with the season as leaves come and go, so a single midday visit is misleading. We note where morning sun lands, where afternoon light breaks through, and which areas stay dark from dawn to dusk. That map drives both the planting palette and the placement of seating, since a spot that is perfect in July under the canopy can be too cold and damp to use in winter. The plan should account for both conditions.
Grade intent gets drawn before anything is built, because flat ground gives water no natural exit. The plan shows which direction each surface falls, where the low points land, where drains sit, and where collected water is going. It also marks which areas must not be raised, particularly around tree root plates. Setting that down on paper means the construction team follows a decision rather than improvising with a shovel. Drainage worked out after the fact is the single most common reason a good looking yard turns into a wet one.
By assigning purpose before drawing shapes. Even a mid sized lot supports two or three rooms: a dining area near the house, a lounge or fire area further out, and often a working zone for storage and trash that nobody wants to look at. Boundaries come from planting, a level change, or a surface change rather than from walls, which would make a compact yard feel smaller. The open middle usually stays open. That restraint is what keeps a small property from reading as a corridor with objects placed along it.
A plan you can hold and read: layout drawn to scale, dimensions, the surfaces and materials for each area, planting with species and quantities, and the intent for grade, drainage, irrigation, and lighting. It is specific enough to build from and specific enough to price honestly, which is the whole point. You should be able to look at it and know where the patio edge falls relative to your back door, and how far the fire area sits from the house, without anyone standing beside you interpreting it.
That is precisely what this stage exists for. Nothing is committed until you sign off, and revisions at that point cost drawing time rather than demolition. Most plans go through at least one round, usually after the client walks the yard with the drawing in hand and realizes the dining area wants to be closer to the door, or that a bed is blocking a view they like. We would far rather hear the objection then. Once construction starts, the plan is what keeps everybody building the same yard.
Because that is the yard you are going to live in. Plants installed at nursery size look sparse, and the instinct is to crowd them, which produces an overgrown tangle in three years that then has to be thinned. Drawing at mature size shows what fills in and where. It matters even more on these streets, where the trees overhead demonstrate the point daily. Under an established canopy the understory spacing has to allow for both the growth of the plant and the reality that it competes with the tree for light and water.
On the drawing, before anyone digs. The plan shows where mainline, valves, and lateral routes travel, and those routes are drawn around root zones rather than through them. Lighting cable follows the same discipline, which is easy enough since low voltage cable can take an indirect path at no penalty. Where a line truly has no way around, the plan notes that it is to be tunneled beneath instead of trenched across. Settling this in the design phase is the difference between a route that protects a tree and one improvised at eight in the morning.
By matching the plant to the light it will genuinely receive, not to the photograph that sold it. Under a heavy canopy that means shade tolerant material with leaf structure suited to low light, chosen also for root competition, since an established tree takes the available moisture first. We favor layered planting, taller understory shrubs with ground cover beneath, so the bed reads as full rather than as scattered specimens. Leaf drop factors into selection too, since the right ground cover absorbs falling leaves into the bed instead of displaying every one.
By working out exactly what you are screening, and from which seat. Older homes on modest lots sit closer together than newer construction, so the real issue is usually one specific window or second story view rather than the entire property line. We sight the problem from where you will actually sit, then solve it with a placed tree, a group of tall shrubs, a trellis, or an overhead structure. Screening the whole perimeter is expensive, dark, and unnecessary, and beneath an existing canopy it can leave the yard feeling closed in.
Paths get drawn where people already walk, then made deliberate. We connect the back door to the primary seating area first, since that is the route used daily, then handle side yard access, trash, and the hose bib. Widths are drawn for two people passing where that matters and narrower where it does not. On a compact lot circulation is the difference between rooms and leftover space. Paths are also routed clear of root zones, so a finished surface does not end up sitting on ground the tree depends on.
In proportion, with each softening the other. A large uninterrupted paved area on a modest lot feels institutional, so we break it with planted bands, edge beds, or a change of material. Planting is drawn against the built edges so the hardscape does not sit as an island floating in the middle of a lawn. Under a canopy the ratio usually favors more surface than a sunny lot would, since deep shade limits what grows and there is no sense specifying beds where nothing is going to thrive.
Hydrozoning means grouping plants by how much water they need so each irrigation zone serves plants with a matching appetite. It carries real weight on a shaded lot, because shaded beds dry out far more slowly than the sunny strip along a south facing fence. Run those together on one valve and something is always suffering. The plan groups them separately and notes which zones will be drip and which will be spray, so irrigation is designed alongside the planting instead of being fitted to it afterward.
Take the dimensions off the drawing and measure them into the actual yard. Set the table you own, or a taped outline of it, in the spot the plan shows, then walk around it with a chair pulled out. This is where most sizing surprises get caught. A dining area that looks generous at scale can be tight once a real table and six chairs occupy it, and on a modest lot that difference is the entire experience. We would rather widen the patio on paper than hear about it after the pavers are down.
One licensed contractor, working from the same drawing. Daniels Landscaping stays accountable for the work. The advantage of design and build under one roof is that the plan does not drift: the people setting the grade and laying the surfaces work for the company that drew it, so the intent behind a tree protection note or a drainage slope survives into the field. When design and construction are split between separate companies, that intent is usually the first thing lost.
Call (818) 443-9300 and we will schedule a site walk at your property. We look at the trees, the grade, the light, the drainage, and how you want to use the space, then talk through what is realistic. From there you receive a free written estimate covering the design and the construction it leads into, so you see the whole path before committing to any of it. Daniels Landscaping is licensed in California under number 1138709, and the same company that draws the plan is the one that builds it.