FAQ
Landscape Design in Hidden Hills, answered
The questions we hear most from Hidden Hills homeowners.
You receive a plan of the property showing layout and dimensions, the materials proposed for every built surface, and the planting laid out by species and location. Patios, walkways, walls, covers, and seating areas are drawn where they will really sit, with the space between them accounted for. Grade and drainage intent is indicated, and the routes for irrigation and lighting are planned rather than improvised later. It is a document you can hold up against the yard, against your furniture, and against what the review process expects to see.
Slope and how water currently travels across the property, because that dictates more of the design than anything else. Then sun and shade through the day, soil condition, existing trees worth building around, sight lines both into the property and out toward open ground, and privacy where it is wanted. On lots this size we also walk the distances, since a route that looks short on paper can be a long trip in reality. Access points, gates, barn approaches, and the paths people already use are noted as they are.
In nearly every case, yes. Landscape plans here typically require approval before work begins, and the review covers materials, heights, fencing, and overall character. That means the design is not just something the two of us agree on privately. It is a document that goes in front of a review process and has to stand on its own. We draw with that in mind from the beginning, so the plan is legible to someone who has never walked the property and does not have the conversations we had in their head.
Materials, colors, heights, and layout, presented clearly enough to be judged without guesswork. A patio labeled only as paving is not sufficient; the paver or stone, its color, and the pattern belong on the sheet. Fencing needs its material and its height. Covers and pergolas need dimensions and finish. Wall heights are called out rather than implied. Vagueness invites questions and questions cost time, so the plan carries the detail on its face and the elevations or references needed to make sense of it.
It sits as a real milestone between design and construction, and we plan around it rather than pretending it will not happen. Design and revisions come first, then submittal, then approval, and only after that does anything move on site. Building materials are not ordered against a plan that has not cleared review, since a change in an approved material would leave the wrong product sitting in a driveway. Treating approval as a scheduled step is what keeps the rest of the calendar honest.
By deciding what each part of the land is for before drawing a single shape. Lots here are big enough that an undivided design just becomes open acreage with a house in it. So we set purposes: an entertaining area near the kitchen, a quieter seating spot with a longer view, working areas connected to horse keeping, and open ground left open on purpose. Circulation links them with routes people will actually walk, and planting, level changes, or a wall marks where one room ends and another begins.
Those uses are drawn first, not fitted in afterward. This is a genuine equestrian community and properties are laid out around horse keeping and riding access, so barn approaches, trailer turning, and the routes riders take are established on the plan before decorative areas are placed. Nothing gets sited where it pinches a turn or forces a rider through a patio. Surfaces near those routes are chosen for footing and drainage rather than looks alone. A design that ignores this reads as imported from somewhere else.
It should. Exposure here is high enough that fire wise planting and clearance near structures are design constraints, not afterthoughts. On the plan that means the zone closest to the house leans on hardscape, gravel, and low, well spaced, low fuel planting, with larger and denser material kept further out. Species selection avoids the resinous and litter heavy choices right against the building. Because these decisions are drawn rather than improvised on installation day, the clearance strategy survives into the finished landscape.
By exposure first. A bed that bakes in west afternoon sun and a bed under an oak canopy are two completely different environments, and putting the same palette in both guarantees half of it struggles. So each area gets plants suited to its light, its soil, and its wind. After that come the design questions: mature size, form, seasonal interest, how much maintenance the plant honestly demands, and whether it fits the rural character the city preserves. Fire behavior near structures narrows the list further.
Hydrozoning means grouping plants by how much water they need so a single irrigation zone can serve them all correctly. Without it, one valve waters a thirsty shrub and a drought tolerant one on the same schedule, and one of them suffers. On the plan the beds are organized so each zone contains plants with similar demand, which also lets us convert those areas to drip cleanly. On a large property the water savings from doing this properly are not small, and the planting simply performs better.
We set the intent during design so the team is not solving it with a shovel later. The plan shows which way surfaces fall, where water collects today, where it needs to go instead, and where drains or swales belong to make that happen. High and low points get identified, and patios and walkways are given slope in the drawing rather than left flat and hoped for. Deciding this before a base is compacted is the difference between a yard that sheds water and one that holds it.
Yes, and planning those routes is one of the quiet advantages of designing before building. The plan identifies where valves, mainline, and drip will run, and where low voltage lighting cable and transformer locations belong. On a large property the runs are long, so knowing them in advance keeps voltage drop and pressure loss from becoming surprises. It also means sleeves go under paving during construction instead of somebody cutting a finished patio open a season later to reach the other side.
Revising is the point of having a plan at all. Changes on paper cost a conversation, while changes during construction cost material and labor, and changes after approval can mean going back through review. So we expect to move things. Shifting a patio to catch afternoon shade, widening a route, swapping a material for one you like better, or trading a planting bed for open ground are all easy at this stage. Nothing goes to review or to the team until the drawing genuinely reflects what you want.
Take your actual pieces and check them against the dimensions rather than trusting the drawn shapes. A dining table with six chairs pulled out occupies far more room than the tabletop suggests. Lounge seating needs a walking route behind it. An umbrella needs clearance from a post. We put dimensions on the plan for exactly this reason, and on a big lot the mistake runs the other way too: an area sized generously on paper can feel sparse once only two chairs sit in it.
Because that is the landscape you are actually paying for. If shrubs are drawn at the size they arrive in, the plan looks full on installation day and turns into a crowded thicket in a few years, with plants competing and someone eventually cutting half of them out. Drawing at mature size means the spacing looks generous at first and correct later. On properties where clearance near structures matters for fire, mature size is also the only honest way to plan those distances.
We do both, and the building is done under one licensed contractor. Daniels Landscaping. The people who drew the plan and the people who install it work for the same company, so the design does not quietly drift during construction the way it does when a drawing is thrown over a fence to whoever bid it. If something on site needs a decision, it is made against the approved plan by people who know why the plan says what it says.
The plan has to account for how the work will physically arrive. Gated access means construction traffic and deliveries are arranged in advance, so during design we consider what can reach a given area, where a truck can turn, and where material can be staged without blocking a driveway or a riding route. If a far corner of the property is difficult to reach, that shapes both the material choices and the phasing. Designing without thinking about access produces a beautiful plan that is painful to build.
Call Daniels Landscaping at (818) 443-9300 and we will arrange the site walk. We assess the property, talk through how you want to use each area, and identify what architectural review will expect the drawing to show. You then receive a free written estimate for the work, and the plan is revised until it is right before anything is submitted or built. We carry California license 1138709, we design and build under one roof, and the team that constructs the project is our own.